D-LINK Wireless 300 MBPS 11N
Caractéristiques techniques
Extrait de la fiche technique du fabricant (PDF joint, Fiche technique DS-3WF0FA-5AC/O.pdf).
| DS-3WF0FA -5AC/O |
| 5GHz 867Mbps 1KM 360° Wireless AP Bridge |
| The wireless Base Station is designed for outdoor applications such as CCTV, city road, factory, etc. With 360° MIMO antenna, |
| it's flexible and ideal for point -to-multipoint application. |
| Up to 1 km wireless transmission distance |
| 867 Mbps 802.11ac wireless bridge |
| Built -in 8dBi 2 x 2 MIMO antenna |
| 802.3af PoE power supply |
| Visualized topology management |
| Real -Time alarm push technology |
| Specification |
| General |
| Product Dimensions (W × H × D) 103.6 mm × 58.3 mm × 198.4 mm (4.1'' × 2.3'' × 7.8'') |
| Package Dimensions (W × H × D) 550 mm × 238 mm × 167 mm (21.6" × 9.3" × 6.5") |
| Net Weight 0.3 kg (0.66 lb) |
| Gross Weight 3.5 kg (7.71 lb) |
| Packing List Wireless Bridge × 1,Power Supply Adaptor × 1,Power Cord × 1,Regulatory Compliance |
| and Safety Information × 1,Quick Start Guide ×1,Screw Pack × 1,Binding Tape × |
| 2,Antenna ×1 |
| Packing Method Single unit packing |
| Working Temperature -30 ° C to 60 ° C ( -22 ° F to 140 ° F) |
| Working Humidity 5% to 95% (no condensation) |
| Storage Temperature -40 ° C to 80 ° C ( -40 ° F to 176 ° F) |
| Storage Humidity 5% to 95% (no condensation) |
| Installation Mode Pole Mounting |
| Ingress Protection IP55 |
| Power Consumption 2.65 W for typical (1 -ch 2MP IPC), Max. 4.5 W |
| Wireless Parameter |
| Wireless Standard IEEE 802.11/a/n/ac |
| Max. Transmission Rate of Air |
| Interface ≤ 867 Mbps |
| Working Frequency Band 5150 MHz ~ 5250 MHz,5250 MHz~ 5350 MHz,5470 MHz~ 5725 MHz,5725 MHz~ 5825 |
| MHz,(Note: Available channel may vary with local regulations.) |
| Antenna Gain 10 dBi |
| Antenna Angle (H) Beamwidth [3 dB] 360° , (V) Beamwidth [3 dB] 8° |
| Transmitting Power 22 dBm @11ac MCS0 (Note: Transmitting power may vary with local regulations.) |
| Receiving Sensitivity -84±2dBm@AC80 -MCS0 |
| Throughput Rate PTP: 160 Mbps/0.5 KM(AC80),160 Mbps/1 KM(AC80),PTMP(1 to 8): 110 Mbps/1 |
| KM(AC80) |
| Hardware Parameter |
| Network Interface 2 × 1000 Mbps RJ45 ports |
| LED Indicator Power indicator,LAN indicator,Signal intensity indicator |
| Reset Hardware resetting button |
| Power Supply 48V PoE or PoE(802.3af) 36 ~57V 0.13A |
| Software Function |
| Application Function TDMA,DFS,TPC,IFM,IPM |
| Channel Width 20/40/80 MHz |
| Channel Selection Auto/manual selection |
| Security Mode WPA2 -PSK |
| Security Mechanism Wireless network name hidden |
| Network Protocol NTP (network time synchronization),SADP (auto search for IP address), HTTPS/HTTP |
| (web management),SSH (debugging) |
| Management Method HCP,Web,iVMS -4200,HPP |
| System Log Syslog,Control center information |
| Upgrade Web,iVMS -4200,HCP,HPP |
| HPP Support one -click activation and remote management via Hik -Partner Pro. Functions |
| supported: |
| 1. Reboot device |
| 2. Restore device |
| 3. Display the topology information |
| 4. Display the connection status between AP and CPEs, including signal intensity, |
| background noise, sending & receiving rate |
| 5. Configure wireless settings, including working mode, SSID, password, channel, |
| channel bandwidth, transmitting power |
| 6. Bridge alignment |
| 7. Spectrum scanning |
| PoE Power Supply |
| PoE Port LAN1 802.3af PoE IN |
| PoE Distance 100m |
| Approval |
| EMC CE-EMC(EN 55032, EN 50130 -4, EN 55035, EN IEC 61000 -3-2, EN 61000 -3-3) |
| Safety CB (IEC 62368 -1),CE -LVD (EN 62368 -1) |
| Chemistry CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006) |
| Radio EN 301 893,EN 300 440,EN 301 489 -3,EN 301 489 -17,EN 301 489 -1, EN IEC 62311 |
| Typical Application |
| Physical Interface |
| No. Interface/Button Description |
| 1 SSID A DIP switch (4 -pin) used to realize 16 |
| sets of matching codes by switching up |
| or down the miniature switches. The |
| CPE will connect to the AP when its |
| SSID matches that of the AP. |
| 2 PoE IN/LAN 1 The 10/100/1000 Mbps adaptive RJ45 |
| port, also can be used as a standard |
| PoE input port. |
| 3 LAN 2 The 10/100/1000 Mbps adaptive RJ45 |
| port. |
| 4 AP/CPE DIP Switch Switch left or right to set the device as |
| an AP or CPE. |
| 5 Reset Long press for 4 seconds to restore the |
| device to factory settings. |
| Dimension |
- Livraison Aramex partout en Tunisie : 8,000 DT TTC par commande.
- Retrait gratuit au 26 rue Chedly Kallala, Lafayette, Tunis.
- Paiement à la livraison ou par virement bancaire.
- Installation par nos techniciens sur demande (devis).
- Retour possible sous 10 jours ouvrables : voir nos conditions générales de vente.
Spécifications
| Marque | Hikvision |
| Norme Wi-Fi | Wi-Fi 5 (802.11ac) |