Pour toute question sur ce produit, contactez-nous au +216 71 802 806 ou sur WhatsApp.
Caractéristiques techniques
Extrait de la fiche technique du fabricant (PDF joint, Fiche technique DS-3E1526P-EI.pdf).
| DS-3E1526P -EI |
| 24 Port Gigabit Smart PoE Switch |
| Smart managed switches are developed by Hikvision, featuring easy management and maintenance. You can easily deploy, |
| monitor, and expand your video security system anytime and anywhere with our software platforms. You can view the |
| network topology, monitor the health of the network, and receive device alarms in real time, which greatly reduces the cost |
| of network operation and m aintenance. |
| 24 × Gigabit PoE port,1 × Gigabit RJ45 port,1 × Gigabit fiber optical port |
| Total PoE power budget 370 W |
| Support IEEE 802.1Q VLAN tagging |
| Support energy saving mode with user -configurable plans |
| Support IEEE 802.3az Energy Efficient Ethernet (EEE) standard, saving power during periods of low data activity |
| Support STP/RSTP loop prevention |
| Support cable detection to locate failure |
| Support DHCP snooping |
| 6 kV surge protection |
| Specification |
| General |
| Shell Metal material |
| Net Weight 3.1 kg (6.83 lb) |
| Gross Weight 3.3 kg (7.27 lb) |
| Dimensions (W × H × D) 440.0 mm × 220.8 mm × 44.0 mm (17.32'' × 8.69'' × 1.73'') |
| Operating Temperature 0 ° C to 45 ° C (32 ° F to 113 ° F) |
| Storage Temperature -40 ° C to 85 ° C ( -40 ° F to 185 ° F) |
| Operating Humidity 5% to 95% (no condensation) |
| Relative Humidity 5% to 95% (no condensation) |
| Power Supply 100~240 V AC, 50/60 Hz, Max. 6.3 A |
| Installation Mode Rack (equipped with mounting ears) |
| Max. Power Consumption 400 W |
| Power Consumption in Idle 30 W |
| Surge Protection 6 kV |
| Network Parameters |
| Ports 24 × Gigabit PoE port,1 × Gigabit RJ45 port,1 × Gigabit fiber optical port |
| MAC Address Table 8 K |
| Switching Capacity 56 Gbps |
| Packet Forwarding Rate 41.66 Mpps |
| Internal Cache 4.1 Mbits |
| Software Function |
| Long Range Ports 1 to 24: up to 300 m. |
| Long range performance may vary depend on camera model or cable condition. |
| PoE Watchdog Ports 1 to 24: auto detect and restart the cameras that do not respond. |
| Link Aggregation Link aggregation is used to aggregate multiple physical ports to form a logical port for |
| load balancing, bandwidth expansion, and port protection. |
| Support static link aggregation. |
| Support 8 aggregation group(s). |
| QoS QoS is used to allocate bandwidth to different services so as to provide end -to-end |
| service quality assurance. |
| Support port -based priority configuration. |
| Support SP and WRR priority scheduling modes. |
| Loop Prevention Loop prevention is used to prevent the switching network from forming loops, which |
| will seriously affect network communication. Disabled by default. |
| Support 802.1D STP. |
| Support 802.1w RSTP. |
| VLAN VLAN is used for network scale planning and network health improvement. |
| Support 802.1Q. |
| Configurable VLAN ID from 1 -4094. |
| Support Trunk, Access port mode. |
| Support Max. 32 VLAN. |
| Port Isolation Ports 1 to 26: port isolation mode to improve network security |
| Ports in an isolation group cannot communicate with each other, but they can |
| communicate with ports outside the isolation group. |
| System Maintenanc e Support device management via web. |
| Support DHCP Client. Enabled by default for dynamic assignment of management IP |
| addresses. |
| Support Super IP, which is a configurable IP address (default: 10.180.190.200) for |
| direct access. |
| Support management via Hik -Central Pro. |
| Support remote management via Hik -Partner Pro. |
| Support cable detection. Abnormal open circuits and short circuits as well as network |
| cable length can be detected. |
| Support 802.1ab LLDP for peer device discovery. |
| Support port mirroring for fault lo cating. |
| DHCP Snooping DHCP Snooping can prevent unauthorized connections to DHCP servers from |
| disrupting the network and affecting normal network communication, and only allow |
| DHCP packets from trusted ports to pass through. Disabled by default. |
| HPP Supp ort one -click activation and remote management via Hik -Partner Pro. Functions |
| supported: |
| 1. Display the port rate. |
| 2. Display the port bandwidth utilization rate. |
| 3. Display the PoE power usage. |
| 4. Display topology information. |
| 5. Display the alarm status. |
| 6. Restart ports and devices. |
| 7. Enable port long -rage mode. |
| 8. Remotely upgrade the device. |
| PoE Power Supply |
| PoE Standard IEEE 802.3af,IEEE 802.3at |
| PoE Power Pin 8-pin power: 1/2( -), 3/6(+), 4/5(+), 7/8( -) |
| PoE Port PoE: Ports 1 to 24 |
| Max. Port Power 30 W |
| PoE Power Budget 370 W |
| Approval |
| EMC CE-EMC (EN 55032: 2015, EN IEC 61000 -3-2: 2019, EN 61000 -3-3: 2013+A1: 2019, EN |
| 50130 -4: 2011 +A1: 2014, EN 55035: 2017); |
| Safety UL (UL 60950 -1); CB (IEC 60950 -1:2005, AMD1:2009, AMD2:2013, IEC 62368 -1: 2014 |
| (Second Edition); CE -LVD (EN 60950 -1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: |
| 2013, EN 62368 -1: 2014+A11: 2017) |
| Chemistry CE-RoHS (2011/65/EU); WEEE (2012/19/EU); Reach (Regulation (EC) No.1907/2006) |
| Typical Application |
| Physical Interface |
| Front Panel |
| Rear Panel |
| No. Indicator/Port Description |
| 1 PWR Indicator Solid on: The switch is powered on normally. |
| Unlit: No power supply is connected or power supply is abnormal. |
| 2 PoE-MAX Indicator Solid on/Flashing: The output power of the switch is about to reach or has reached |
| the upper limit. The power supply may be abnormal if more devices are connected. |
| Unlit: The switch does not supply power to a powered device (PD), or supplies |
| power to a PD normally and its output power does not reach the upper limit. (About |
| 5 seconds after the output power of the switch returns to normal, the PoE -MAX |
| indicator will be unlit.) |
| 3 Gigabit RJ45 Port |
| Indicator (Port 25) Solid on: The port is connected. |
| Flashi ng: The port is transmitting data. |
| Unlit: The port is disconnected or connection is abnormal. |
| 4 Gigabit SFP Fiber |
| Optical Port Indicator |
| (Port 26) Solid on: The gigabit SFP fiber optical port is connected. |
| Flashing: The gigabit SFP fiber optical port is transmitting data. |
| Unlit: The gigabit SFP fiber optical port is disconnected or connection is abnormal. |
| 5 Reset Button Used for restoring all the configurations of the switch to the default settings. |
| 6 LINK/ACT Indicator Solid on: The port is connected. |
| Flashing: The port is transmitting data. |
| Unlit: The port is disconnected or connection is abnormal. |
| 7 PoE Indicator Solid on: The switch supplies power to a PD normally. |
| Unlit: The switch is disconnected from a PD or power supply is abnormal. |
| 8 Gigabit PoE RJ45 Port Used for connection to a PD via a network cable. |
| 9 Gigabit RJ45 Port (Port |
| 25) Used for connection to another device via a network cable. |
| 10 Gigabit SFP Fiber |
| Optical Port (Port 26) Used for connection to another device via an optical fiber when plugged into with an |
| optical module. |
| 11 Grounding Terminal Used for connecting to the grounding cable to protect the switch from lightning. |
| 12 Power Supply Use the attached power cord t o connect the switch to a socket. |
| Dimension |
- Livraison Aramex partout en Tunisie : 8,000 DT TTC par commande.
- Retrait gratuit au 26 rue Chedly Kallala, Lafayette, Tunis.
- Paiement à la livraison ou par virement bancaire.
- Installation par nos techniciens sur demande (devis).
- Retour possible sous 10 jours ouvrables : voir nos conditions générales de vente.
Spécifications
| Alimentation PoE | Oui |
| Marque | Hikvision |
| Capacité de commutation | 56 Gbit/s |
| Budget PoE | 370 W |
| Ports PoE | 24 |
| Nombre de ports | 24 ports |
| Gigabit | Oui |
| Gestion du switch | Smart (web) |