Pour toute question sur ce produit, contactez-nous au +216 71 802 806 ou sur WhatsApp.
Caractéristiques techniques
Extrait de la fiche technique du fabricant (PDF joint, Fiche technique DS-QAZ0510G1.pdf).
| The interface varies with models, refer to the actual devices for details.Note• When the audio input is constant voltage input (100 V), the knob can be adjusted to 10 |
| W, 5 W, and 2.5 W. |
| • When the audio input is constant voltage input (70 V), the knob can be adjusted to 10 |
| W, 5 W, 2.5 W and 1.25 W. |
| • When the audio input is constant impedance input , the knob should be adjusted to 8 Ω.Knob |
| Audio Input214.78[8.46]Ø132.09[5.2]Ø242.78[9.56] |
| Unit: mm[inch] |
| Analog Pendant SpeakerDimension1 |
| Interface2The apperance varies with models, refer to the actual devices for details. |
| Quick Start Guide |
| UD39287 B |
| • Before Installation, find the installation position of the device . |
| • Complete the wiring of the device before installation. See Chapter 2 for detailed information.Preparation Before Installation3Note |
| NoteAboutthisDocument |
| This Document includes instructions for using and managing the Product. Pictures, charts, images |
| and all other information hereinafter are for description and explanation only. |
| The information contained in the Document is subject to change, without notice, due to firmware |
| updates or other reasons. Please find the latest version of the Document at the Hikvision website |
| (https://www.hikvision.com). Unless otherwise agreed, Hangzhou Hikvision Digital Technology Co., |
| Ltd. or its affiliates (hereinafter referred to as "Hikvision") makes no warranties, express or implied. |
| Please use the Document with the guidance and assistance of professionals trained in supporting |
| the Product. |
| AboutthisProduct |
| This product can only enjoy the after-sales service support in the country or region where the |
| purchase is made. |
| AcknowledgmentofIntellectualPropertyRights |
| described in this Document, which may include licenses obtained from third parties. |
| Any part of the Document, including text, pictures, graphics, etc., belongs to Hikvision. No part of this |
| Document may be excerpted, copied, translated, or modified in whole or in part by any means |
| without written permission. |
| and other Hikvision’s trademarks and logos are the properties of Hikvision in various |
| jurisdictions. |
| Other trademarks and logos mentioned are the properties of their respective owners. |
| LEGALDISCLAIMER |
| TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS DOCUMENT AND THE PRODUCT |
| DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND "WITH |
| ALL FAULTS AND ERRORS". HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING |
| WITHOUT LIMITATION, MERCHANTABILITY , SATISFACTORY QUALITY , OR FITNESS FOR A PARTICULAR |
| PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION |
| BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, |
| INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, |
| OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON |
| BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY , OR OTHERWISE, IN |
| CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE |
| POSSIBILITY OF SUCH DAMAGES OR LOSS. |
| YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, |
| AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY |
| LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, |
| OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL |
| SUPPORT IF REQUIRED. |
| YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE |
| SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. |
| ESPECIALLY , YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT |
| INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF |
| PUBLICITY , INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. |
| YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE |
| DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR |
| PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED |
| TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS |
| ABUSES. |
| IN THE EVENT OF ANY CONFLICTS BETWEEN THIS DOCUMENT AND THE APPLICABLE LAW, THE |
| LATTER PREVAILS. |
| 6RegulatoryInformation |
| Theseclausesapplyonlytotheproductsbearingthecorrespondingmarkorinformation. |
| FCCInformation |
| Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to |
| operate the equipment. |
| FCC compliance: Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. |
| These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses, and can |
| radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio |
| communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful |
| interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the |
| interference by one or more of the following measures: |
| —Reorient or relocate the receiving antenna. |
| —Increase the separation between the equipment and receiver. |
| —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. |
| —Consult the dealer or an experienced radio/TV technician for help. |
| FCCConditions |
| This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: |
| (1) this device may not cause harmful interference, and |
| (2) this device must accept any interference received, including interference that may cause undesired operation. |
| This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated |
| with minimum distance 20cm between the radiator & your body. |
| EUConformityStatement |
| This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European |
| standards listed under Directive 2014/53/EU (RED), the Directive 2014/30/EU (EMCD), Directive 2011/65/EU (RoHS). |
| Note: The products with the input voltage of within 50 to 1000 VAC or 75 to 1500 VDC comply with Directive 2014/35/EU (LVD), and the rest products comply |
| with Directive 2001/95/EC (GPSD). Please check the specific power supply information for reference. |
| Directive 2012/19/EU (WEEE Directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. |
| For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated |
| collection points. For more information see: www.recyclethis.info. |
| Directive 2006/66/EC and its amendment 2013/56/EU (Battery Directive): This product contains a battery that cannot be disposed of as unsorted |
| municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, |
| which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a |
| designated collection point. For more information see: www.recyclethis.info. |
| IndustryCanadaICES-003Compliance |
| This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements. |
| This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: |
| (1) this device may not cause interference, and |
| (2) this device must accept any interference, including interference that may cause undesired operation of the device. |
| Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorisée aux deux |
| conditions suivantes: |
| (1) l'appareil ne doit pas produire de brouillage, et |
| (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le |
| fonctionnement. |
| This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and |
| operated with minimum distance 20cm between the radiator & your body. |
| ce matériel est conforme aux limites de dose d'exposition aux rayonnements, CNR-102 énoncée dans un autre environnement.cette eqipment devrait |
| être installé et exploité avec distance minimale de 20 entre le radiateur et votre corps. |
| 1Fix the upper component 1 to the ceiling with an expansion screw. |
| 2Tighten the upper component 2 to the upper component 1.PendantMounting |
| • Press and hold the adjustment part 1 to extend the upper rope. |
| • Drag the adjustment part 2 to shorten the upper rope. |
| • Press and hold the adjustment part 3 to extend three lower ropes. |
| • Drag the adjustment part 4 to shorten three lower ropes.RopeLengthAdjustment3Ensure that the numbers (1,2,3) on the hook label correspond to the silk-screen numbers (1,2,3) on the speaker holes, and |
| hang three hooks into the speaker holes . If the speaker is still not horizontal, adjust the speaker to the horizontal state by |
| adjusting the rope length.4Installation SafetyInstruction5 |
| Caution |
| Note• In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region. |
| • If the device supports wall mounting, the mounting surface shall be able to withstand the additional force of three times the weight of the device but not less than 50 N. The device and its associated mounting means |
| shall remain secure during the installation. After the installation, the device, including any associated mounting plate, shall not be damaged. Refer to datasheet for details. |
| • If the device is intended to be moved or used in a certain direction, keep the required direction when moving or using the device. Refer to datasheet for details. |
| • CAUTION: If the device needs to be installed with a specific bracket of our company, use the corresponding bracket only. Use others (such as carts, stands, and carriers) may result in instability and cause injury. Refer to |
| the device datasheet for bracket model details. Refer to datasheet for details. |
| • For the device with sound playing function, to prevent possible hearing damage, do not listen at high volume levels for long periods. Refer to the datasheet for details. |
| • Refer to the device label for the standard power supply. Please make sure your power supply matches with your device. |
| • Make sure that the power has been disconnected before you wire, install, or disassemble the device. |
| • To avoid heat accumulation, good ventilation is required for a proper operating environment. |
| • If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the power cable, and contact the service center. |
| • If the product does not work properly, please contact your dealer or the nearest service center. Never attempt to disassemble the product yourself. We shall not assume any responsibility for problems caused by |
| unauthorized repair or maintenance.Warning |
| • For the battery with + and - signs, + identifies the positive terminals of the device which is used with or generates direct current, and - identifies the negative terminals of the device which is used with or generates direct |
| current. |
| • No naked flame sources, such as lighted candles, should be placed on the equipment. |
| • If the serial port of the device is used for debugging only, it is reserved only for professionals or technical support for device maintenance. Refer to the document for details. |
| • Attach the device properly to the floor/wall in accordance with the installation instructions to prevent injury. Refer to the document for details. |
| • DO NOT drop the product or subject it to physical shock. Do not install the product on vibratory surface or places. |
| • DO NOT expose the device to high electromagnetic radiation. |
| • DO NOT expose the device to extremely hot, cold, dusty, corrosive, saline-alkali, or damp environments. For temperature and humidity requirements, refer to the datasheet for details. |
| • DO NOT install indoor product where it may get wet by water or other liquid. |
| • To avoid fire hazard or electric shock, DO NOT expose the device to rain or extremely damp environments. |
| • Accessing to the Internet may cause network security problems. Please strengthen the protection of your personal information and data security. When you find that the device may have network security risks, please |
| contact us in time. |
| • Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. |
| • Keep all wrappers after unpacking them for future use. In case of any failure occurred, you need to return the device to the factory with the original wrapper. Transportation without the original wrapper may result in |
| damage on the device and the company shall not take any responsibilities. |
| • If the power output port of the device does not comply with Limited Power Source, the connected device powered by this port shall be equipped with a fire enclosure. |
| • Do not ingest battery. Chemical Burn Hazard! |
| • This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. |
| • Keep new and used batteries away from children. |
| • If the battery compartment does not close securely, stop using the product and keep it away from children. |
| • If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. |
| • CAUTION: Risk of explosion if the battery is replaced by an incorrect type. |
| • Improper replacement of the battery with an incorrect type may defeat a safeguard (for example, in the case of some lithium battery types). |
| • Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion. |
| • Do not leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or the leakage of flammable liquid or gas. |
| • Do not subject the battery to extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or gas. |
| • Dispose of used batteries according to the instructions. |
- Livraison Aramex partout en Tunisie : 8,000 DT TTC par commande.
- Retrait gratuit au 26 rue Chedly Kallala, Lafayette, Tunis.
- Paiement à la livraison ou par virement bancaire.
- Installation par nos techniciens sur demande (devis).
- Retour possible sous 10 jours ouvrables : voir nos conditions générales de vente.
Spécifications
| Marque | Hikvision |